Thiết Bị Lưu Trữ Mạng NAS Synology FS1018

• Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
• Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.

• 200 TB (32 GB RAM required, for RAID 5 or RAID 6 groups only)
• 108 TB

• “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
• The maximum raw capacity is not limited by the maximum single volume size. Synology NAS models may utilize capacities over the maximum single volume size as long as each volume created is below the limit. (Learn more)
• Each internal volume (may consist of multiple drives) is expandble up to 108TB (with memory less than 32GB) or 200TB (with memory equal to or greater than 32GB).

• PCIe Network Interface Card (Learn more)
• M2D18 – Dual M.2 SATA/NVMe SSD adapter card for SSD cache

• Btrfs
• EXT4

• Btrfs
• EXT4
• EXT3
• FAT
• NTFS
• HFS+
• exFAT*

• Full-Speed Mode
• Cool Mode
• Quiet Mode

48.36 W (HDD Hibernation)

165.12 BTU/hr (HDD Hibernation)

• Power consumption is measured when it is fully loaded with Western Digital 1TB WD10JFCX hard drive(s).
• Noise Level Testing Environment: Fully loaded with WD 1TB WD10JFCX hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 17.2 dB(A); Temperature: 23.6˚C; Humidity: 58.2%.